EVS MulticamLSM Version 8.03 - Dec 2006 User's Manual - Manual (Page 86)

EVS MULTICAM - User’s Manual Version 8.03
EVS Broadcast Equipment SA – Dec 2006
84
that the operator can manually enter the time code of the desired
Short IN / Short OUT point if needed. Press ENTER to confirm, or
ESC to cancel.
Making a copy of a clip with the VDR Panel Player :
- Load the original clip
- Press ALT+S to save the current clip to another location. This will
create a copy of the clip. The operator has the opportunity to rename
the clip during this operation. He can then save the clip to the current
cursor location by pressing ENTER, or to the first available clip
location on the current server by pressing ALT+U.
Note: The CUT / COPY / PASTE functions are available at any time to move and copy clips
in the lower section of the VDR Panel, even when one of the upper windows is
active.
VDR PANEL – RECORDER WINDOW
The VDR Panel Recorder can be used to start/stop the record, and to
create clips from the local record trains. For example, it allows the
creation of clips on a server that has no PLAY channel.
To start/stop the record : Press ALT+R to start or stop the record on the
record channel assigned to the window. No confirmation is required.
!
Important note : In LSM mode, all recorders will be stopped at once to keep the
synchronization between all record channels.
Creating clips with the VDR Panel Recorder :
- Press ALT+I / ALT+O to mark a Short IN / Short OUT point on the last
recorded picture. The time code appears in the adjacent field, and
the cursor is automatically placed on that field to allow the operator to
edit the time code of the Short IN / Short OUT point if desired. Press
ENTER to confirm or ESC to cancel.
- Repeat this operation for the complementary Short IN / OUT point.
This is not mandatory. If only a Short IN or a Short OUT point is
marked, the “Default Clip Duration” defined in the setup (p.2.2 F2) will
be used to define the missing point.
- Select from which record train(s) the clip(s) must be created : press
ALT + the letter (A/B/C/D/E/F) of a record train to select / de-select it.
Letters highlighted in RED means that a clip will be created from the
corresponding record train ; letters highlighted in GREEN means that
time code of the current record
List of available record
channels (green) and
channels used for clips
creation (red)
Remaining capacity of
the current record
channel