EVS MulticamLSM Version 8.03 - Dec 2006 User's Manual - Manual (Page 61)

EVS MULTICAM - User’s Manual
EVS Broadcast Equipment SA – Dec 2006
Version 8.03
59
10. Video
Delay
When the Multicam software has been configured with a base
configuration = Video Delay in the Channel Parameters menu, the Delay
Screen will appear automatically when the application is started. In this
case, all play channels will be available from the Delay screen.
If the Multicam is running a base configuration different than Video Delay,
this screen can be called manually from the Clip Screen, Playlist Screen
or Network Screen by pressing SHIFT+F7 on the keyboard. In this case,
only the play channels assigned to user #1 (i.e. the 1
s t EVS remote panel
if the base configuration is LSM or maXS, or the 1 s t protocol if the base
configuration is a slave mode).
For each play channel, the operator can adjust :
o the video and audio source (camera angle, and source server
if several units are connected on an SDTI network);
o the desired delay in hh:mm:ss:fr.