EVS MulticamLSM Version 8.03 - Dec 2006 User's Manual User Manual
Page 81
EVS
MULTICAM - User’s Manual
EVS Broadcast Equipment SA – Dec 2006
Version 8.03
79
- A “Cut & Paste” of a clip is equivalent to a MOVE CLIP, meaning that any reference to
that clip inside playlists will be updated to the new location of that clip. This is not the
case when doing a “Copy & Paste”, then deleting manually the original clip.
- Playlist can only be pasted to local playlist locations. It means that network playlists
can only be copied by “pulling” them from the remote machine to the local machine.
- Copying a playlist using the CUT/COPY/PASTE functions from the Clip Screen will only
copy the “EDL” (i.e. the list of clips) but the clips themselves will remain in their original
location. If the operator wishes to create a local copy of all network clips contained in
the playlist, the copy of the playlist must be performed from the EVS remote panel.
Refer to the “Playlist Management” chapter of this manual for further details.
CTL+DEL:DELETE
1. Move the cursor to the clip/playlist to delete.
2. Press CTRL + DEL or click on the corresponding area on the clip
screen.
→ In CAM mode, only the camera selected is deleted
→ In CLIP mode, all cameras of the clip are deleted.
A clip/playlist cannot be deleted while it is on air.
Notes:
- When a clip is deleted, all playlists are scanned and that clip is removed from all of
them.
- When a clip is protected, or when the “Confirm Delete Clip” is set to “Yes” in the setup
menu (p.3.1 F2), a confirmation is required to delete the selected clip(s).