EVS MulticamLSM Version 8.03 - Dec 2006 User's Manual - Manual (Page 116)

EVS MULTICAM - User’s Manual Version 8.03
EVS Broadcast Equipment SA – Dec 2006
114
HOW TO PERFORM AN ‘A BASE’ EDIT?
When in A BASE mode the browse function searches between AUDIO
IN/OUT points and NOT video
Video Advance
1. Enter the Playlist mode.
2. Browse to the desired clip in the playlist.
3. Press Shift+ V BASE (A) to enter A BASE mode
4. Press to highlight V ADVANCE (shift+B )
5. At the on screen prompt, enter a value on the ‘F’ keys including
leading zeros ( 0+2+1+2= 2:12), OR move the T-BAR and press
enter.
The value entered will be present on the PRV SCREEN when the clip
is next to play in a playlist.
Edit point (A BASE)
Video is shortened in the previous clip and the video from the clip being
edited is extended.
Video Delay
1. Enter the Playlist mode.
2. Browse to the desired clip in the playlist.
3. Enter A BASE mode by pressing Shift + V BASE (Shift + A, the
button now flashes Red)
4. Press to highlight V DELAY (shift+B and shift+B again )
5. At the on screen prompt, enter a value on the ‘F’ keys including
leading zeros ( 0+2+1+2= 2:12), OR move the T-BAR and press
enter.
The value entered will be present on the PRV SCREEN when the clip
is next to play in a playlist.