EVS MulticamLSM Version 8.03 - Dec 2006 User's Manual - Manual (Page 29)

EVS MULTICAM - User’s Manual
EVS Broadcast Equipment SA – Dec 2006
Version 8.03
27
Lipsync value(ms):
(-22 to 17 ms)
Lipsync parameter is the delay (in ms) between video and audio signals.
A positive value means video is ahead of audio. A negative value means
audio ahead of video.
This parameter is also available from the Channel Parameters option of
the EVS Maintenance Menu. Changing the Lipsync value in the SETUP
menu will update it in the EVS menu and vice versa.
Default: 0 ms
Note: This adjustment is done during the RECORD process. A new Lipsync value will
apply for the next recorded pictures only.
Audio Meters on OSD:
(Yes / No)
Enable/Disable the display of audio meters at the bottom of each
monitoring output.
Default: Yes
Audio Meters Adj.(dB):
(-12 to +12 by 2 dB steps)
Adjust the sensitivity of audio meters on the OSD of the monitoring
outputs. A positive value means that the meters will be more sensitive.
Default: 0 dB
Aux Track Output:
(Prv / Prv&7-8/15-16 / PGM)
Defines to which audio outputs the Aux track of the playlist will be played
out of.
Prv : the Aux track will use the audio outputs normally assigned to the
PRV channel. If no Prv channel is available, the Aux track will not be
assigned to any audio output.
Prv&7-8/15-16 : the Aux track will use the audio outputs normally
assigned to the PRV channel if there is one, plus all the audio outputs
from 7-8/15-16 that have not yet been assigned to another channel. Use
this option if you need an aux track without PRV channel available.
PGM : the Aux track will use the audio outputs normally assigned to the
PGM channel.
Default: Prv
Audio p.5.2
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
This page is intentionally left blank and is reserved for future
developments