EVS MulticamLSM Version 8.03 - Dec 2006 User's Manual - Manual (Page 70)

EVS MULTICAM - User’s Manual Version 8.03
EVS Broadcast Equipment SA – Dec 2006
68
the clip (CLIP mode).
Aux Clip: allows to assign a clip as auxiliary audio clip to the current
playlist. Press CLEAR + Aux Clip (CLEAR + SHIFT+B) to remove the
current auxiliary clip. Refer to the “Playlist Management” chapter of this
manual for further details.
***: allows to assign a ranking to the current clip. Pressing several times
this key will scroll through the different values : 0 (***, not highlighted),
*** , ** , * . Depending on the mode selected with the D key
(CLIP/CAM), this ranking is assigned only to the camera angles of the clip
loaded on the controlled channels (CAM mode), or to all camera angles of
the clip (CLIP mode). If the “Keyword Info” parameter of the setup menu
is set to “Yes”, the ranking will appear on the OSD of the monitoring
outputs when cueing up the clip.
Sort->TC: Press SHIFT+C again in SET TC mode to call it. It allows the
operator to search the database for all clips containing a specific time
code. This function is explained in details in Chapter 8 (PGM+PRV mode)
of this manual.
Set TC: This function is only available in Shift-B on the Sort-TC menu. It
allows the operator to restripe the time code of a clip. This function is
explained in details further in this chapter. Depending on the mode
selected with the D key (CLIP/CAM), the new time code value is assigned
only to the camera angle of the clip loaded on the primary channel (CAM
mode), or to all camera angles of the clip (CLIP mode).
Name: this function is only available if a keyword file is selected in the
setup menu. It is used to name a clip based on available keywords.
Refer to the “Keyword Management” chapter of this manual for details.
When the NAME function is selected, pressing SHIFT+C again will call
the SEARCH function.
Search: this function is “hidden” behind the NAME function. Press
SHIFT+C again in NAME mode to call it. It allows the operator to search
the database for clips based on keywords and ranking. Please refer to
the “Keyword Management” chapter of this manual for details.
PostRoll: enables/disables the POST ROLL mode. This mode is
explained in details in Chapter 8 (PGM+PRV mode) of this manual.
Clip/Cam: pressing the D key will toggle between CAM and CLIP modes
on the remote. Please note that this mode on the remote and on the VGA
screens are never synchronized. In CAM mode, the PUSH, >ARCHIVE,
ranking assignment, keyword assignment, and NAME functions will apply
only to the camera angles of the clip loaded on the controlled channels.
In CLIP mode, these functions will apply on all camera angles of the clip.
HOW TO CLEAR ALL CLIPS ?
1. go to the Main Menu (SHIFT + MENU)
2. press the function key F7 on the remote. Press ENTER or CLEAR on
the remote panel to confirm/cancel the operation. Clips stored in
protected pages as defined in the setup will not be deleted by this