EVS MulticamLSM Version 8.03 - Dec 2006 User's Manual - Manual (Page 41)

EVS MULTICAM - User’s Manual
EVS Broadcast Equipment SA – Dec 2006
Version 8.03
39
The server allows now to totally clean the VBI information from the
vertical blanking at playback or to clean it only when it would not have
been preserved.
In SD, the page is as follows :
The possible parameters are :
• IN TC REF : selects which time code is used as reference for the
recorder.
• IN LOOP : selects on which line the VITC must be written on the
loop of the input. The TC and user bits are always the same as the
one on the input.
• SD OUT D-VITC : selects if VITC and user bits are present or not
on the output. This information can come from the input (In) or can
be regenerated (Regen) from the internal table of time code inside
the machine that takes into account TC jumps.
• Clean VBI : No, Always, If not OK