EVS MulticamLSM Version 8.03 - Dec 2006 User's Manual - Manual (Page 109)

EVS MULTICAM - User’s Manual
EVS Broadcast Equipment SA – Dec 2006
Version 8.03
107
SPEED: Select the playback speed of the clip with the Lever then press
ENTER to validate. Values are ‘Unknown’ and from 0 to 100%.
Operators have access to the secondary lever like when clips are
replayed. While editing the speed of a clip, pressing Shift+Lever on the
remote allows to access the secondary lever speed defined in the menu.
FX DUR: This sets the duration of the transition effect. The default
value that initially appears is determined by the value set in the SETUP
menu. The effect duration will affect the transition at the beginning of the
selected clip. Use the Lever to adjust the value, then press ENTER to
confirm.
EFFECT: Use this to select the type of transition effect (Mix/Wipe/Cut)
Move the lever to set the type of effect, when Effect is highlighted. Press
ENTER to validate.
EDIT ALL: Selecting this, followed by one of the playlist parameter
option (speed, effect, effect duration) will allow the operator to EDIT ALL
clips in the list at one time.
DELETE: This allows the operator to quickly edit a playlist by removing
the selected clip. The clip that has been «cut» can then be inserted into
another location. This clip is displayed on the second PRV output. To
insert it at another position in the playlist, simply go to that position using
the jog knob and press the INSERT key (or TAKE).
UNDO/REDO: The last modifications of a playlist can be undone/redone
for as long as the operator does not exit the playlist mode (e.g. :
returning to live). The undo/redo commands are available from the
secondary menu of the playlist (press Menu to access it).
Pressing the Undo command (D key) will undo the last modification. Up to
9 modifications can be undone. Once a modification has been undone, it
is possible to redo it by pressing the Redo key (C key).
MAKE LOCAL: Possibility to copy locally remote clips in a playlist.
In the playlist secondary menu, select on the B position ‘MakeLoc.’
When the function is called the remote clips are replaced by short copies
of the local ones as soon as they are available.
HOW TO DELETE CLIPS FROM A PLAYLIST?
While in EDIT mode, scroll within the playlist to the clip that needs to be
deleted.
If the BROWSE mode is active, the first frame will appear on the display
as each clip is scrolled through.
When the clip to be removed is located, select DELETE from the playlist
Edit Menu. The selected clip will be removed from the playlist. A
confirmation message will appear if that option has been enabled in the
setup menu.
HOW TO INSERT CLIPS INTO A PLAYLIST?
Using the normal Playlist Edit or the BROWSE modes, as above, scroll to