EVS MulticamLSM Version 8.03 - Dec 2006 User's Manual - Manual (Page 57)

EVS MULTICAM - User’s Manual
EVS Broadcast Equipment SA – Dec 2006
Version 8.03
55
selection. Do the same to bring the control of a channel back to the EVS
remote.
FULL CONTROL AND LEVER CONTROL
Controlling both PGM and PRV is done when PRV CTL (direct access key
from the remote) is not activated.
Once selecting PRV CTL the operator will have control of the PRV with
the jog knob and most buttons, while the lever and the Play button will
control the PGM output. At this point, selecting clips will call them up on
the PRV side.
USEFUL FACILITY:
The combination of the PRV CTRL and the SW to IN functions allows the
operator to auto-chain cameras from the same IN point.
When an IN point has been marked, the operator activates the PRV CTL
and sets ON the SW to IN option. Then the slow motion of one camera
can be started from this IN point. The operator selects another camera in
the PRW output and, via the Take button, can auto-chain cameras from
the same IN point on the PGM output.