EVS MulticamLSM Version 8.03 - Dec 2006 User's Manual - Manual (Page 128)

EVS MULTICAM - User’s Manual Version 8.03
EVS Broadcast Equipment SA – Dec 2006
126
14. XNet SDTI
Network
Overview
The XNet network is composed by several XT servers all connected with a
75-Ohm coaxial cable (BNC).
The exchange between systems is operated through the SDTI interface at
270 or 540 Mbps.
The XNet requires a Network Server dedicated to the management of the
Database shared among all XT servers. This doesn’t require an extra
server, but it has to be assigned to 1 server on the network. If this
system disconnects, another XT server will automatically take over.
These settings can be found in the Configuration option of the EVS
Maintenance menu. For details about the setup of XNet, please refer to
the XT Disk Recorder Technical Reference.
Editor