EVS MulticamLSM Version 8.03 - Dec 2006 User's Manual - Manual (Page 135)

EVS MULTICAM - User’s Manual
EVS Broadcast Equipment SA – Dec 2006
Version 8.03
133
the Playlist bank.
2. Press the PLST key on the remote panel.
3. Move the lever to start the playback or press the PLAY key.
!
Note: While the playlist is rolling on air, a remote clip might be unavailable due to a
network problem or simply if the remote LSM has left the network.. In this case, the
clip is marked as ‘NOT AVAILABLE’ on the playlist screen and is skipped when the
playlist is rolling. If a clip is made available again, it will re-appear automatically and
be played at the right position in the playlist.
Unavailable clips are shown on the VGA monitor but not on the LCD of the remote.
The operator can decide to definitively remove the unavailable clips from the current
playlist by using the Clr Unav. function (SHIFT+B) in Playlist Edit mode. Note that
this function is only visible when unavailable clips are present and with Split Audio
Editing turned off.
HOW TO CREATE LOCAL CLIPS WITH REMOTE RECORDS TRAINS?
1. Select the RECORDS mode in the Network Menu
2. Then select the REMOTE LSM in the list.
Note: The LCD display returns to the normal mode
3. Press the RECORD key to select the LIVE mode
!
A 2 to 3-second delay to LIVE has been defined to ensure safe operations.
4. Use the JOG knob to go in search mode.
5. Change camera angles if necessary. Note that changing camera
angles on network train will always switch in pause on the new
camera.
Note: The label of the remote camera is different in order to identify it easily
Remote LSM
B/02
Camera
CAM
6. Press the IN key to mark your SHORT IN point of the clip
7. Search the SHORT OUT point and then press the OUT key to
mark it also.
8. Now select the location of the clip to store and press the