EVS MulticamLSM Version 8.03 - Dec 2006 User's Manual - Manual (Page 87)

EVS MULTICAM - User’s Manual
EVS Broadcast Equipment SA – Dec 2006
Version 8.03
85
the corresponding record train is available but will not be used to
create a clip.
- To define the name of the clip before saving it, press ALT+N, type the
desired name and validate with ENTER.
- The operator can also restripe the time code of the IN point of the clip
to a new value. Press ALT+T, type the desired value and confirm with
enter. When creating the clip, this time code will replace the original
time code of the Short IN point.
- Press ALT+S to save the clip(s). The operator still has the
opportunity to rename the clip during this operation. He can then
save the clip to the current cursor location by pressing ENTER, or to
the first available clip location on the current server by pressing
ALT+U.