EVS MulticamLSM Version 8.03 - Dec 2006 User's Manual - Manual (Page 42)

EVS MULTICAM - User’s Manual Version 8.03
EVS Broadcast Equipment SA – Dec 2006
40
In HD, the page is as follows :
The possible parameters are :
• IN TC REF : selects which time code is used as reference for the
recorder.
• IN LOOP : selects on which line the VITC must be written on the
loop of the input. The TC and user bits are always the same as the
one on the input.
• HD OUT HANC LTC : selects if HANC LTC and user bits are
present or not on the HD output. This information can come from
the input (In) or can be regenerated (Regen) from the internal
table of time code inside the machine that takes into account TC
jumps.
• HD OUT HANC VITC : selects if HANC VITC and user bits are
present or not on the HD output. This information can come from
the input (In) or can be regenerated (Regen) from the internal
table of time code inside the machine that takes into account TC
jumps.
• SD OUT D-VITC : selects if VITC and user bits are present or not
on the downconverted output. This information can come from the
input (In) or can be regenerated (Regen) from the internal table of
time code inside the machine that takes into account TC jumps.
• Clean VBI : No, Always, If not OK