EVS MulticamLSM Version 8.03 - Dec 2006 User's Manual - Manual (Page 106)

EVS MULTICAM - User’s Manual Version 8.03
EVS Broadcast Equipment SA – Dec 2006
104
To use the following commands, you must be in Playlist Edit or Playlist
Diffusion mode. Press the PLST key on the EVS remote to enter the
Playlist Edit mode. The LCD screen of the remote display the information
about the previous, current and next 3 clips of the playlist. Press the
PLST key again to enter the Playlist Diffusion mode.
TO NAME THE CURRENT CLIP IN THE PLAYLIST: this function is only
available when the PLST EDIT or PLST DIFF mode is active on the EVS
remote panel. Type the desired name for the current clip in the NAME
field, and press F1 to name the current clip in the playlist.
Note: Naming the current clip of the playlist will affect the original clip.
PLAY/PAUSE: press ALT + P to start the playback / pause of the playlist
from the current position.
RECUE: press ALT + R to recue to the beginning of the playlist and
pause.
NEXT: press ALT + N while the playlist is playing to force immediately
the transition to the next clip in the playlist.
SKIP: press ALT + S while the playlist is playing to skip the next clip.
The current clip will play until the defined OUT point, than the playlist will
skip the next one and play the one after instead.
HOW TO RECALL A PLAYLIST?
The active PLAYLIST can be selected by pressing PLST.
The first time this is pressed, the Playlist Edit mode will be entered.
Here, the operator will see the first frame of the highlighted clip within
the playlist appear on the PGM and PRV outputs. At the start, full control
will be of the PGM side; scrolling through the playlist can be done here.
Press PLST again and the Playlist diffusion mode is entered: the first
frame of the clip following the one on the PGM will be displayed on the
PRV side. This allows the operator to play only parts of the playlist,
starting from current position.
A third selection of the PLST button cues the playlist to the beginning,
displaying the first clip on the PGM side and the following clip on the
PRV.
When a playlist is activated, there will be a new menu display that will
appear on the LCD of the remote.
Editing the Playlist in Playlist diffusion mode is not possible. Press the
EDIT function (D button) or move the jog knob to return to the Playlist
Edition mode and perform the editing.
When in Playlist Edit or Playlist Diffusion mode, you can recall a new
playlist by selecting the playlist bank (SHIFT + F10 on the remote), and
pressing the desired F_ key. If the new playlist is empty, the system will