beautypg.com

How exit the playlist mode – EVS MulticamLSM Version 8.03 - Dec 2006 User's Manual User Manual

Page 111

background image

EVS

MULTICAM - User’s Manual

EVS Broadcast Equipment SA – Dec 2006

Version 8.03


109



When the playback of the playlist is not started from the beginning, the
system calculates the offset between the current position and the
beginning of the playlist, and applies the same offset to the Aux Clip, so
that it can remain synchronized with the playlist. If the duration of the
Aux Clip is longer than the playlist duration, the auxiliary audio clip keeps
playing even after the video has stopped. Otherwise, the audio clip ends
itself before the end of the playlist, when the audio clip reaches its OUT
point.

How to add/remove an auxiliary audio clip to a playlist?


1. Make the Aux Clip button active by selecting a clip from the clip bank.

This can be done outside of the PLST EDIT mode, or in PLST EDIT
mode with PRV CTRL ON. You will see the “Aux Clip” option
appearing in the secondary menu on the LCD of the remote panel.

2. Then press MENU to call the secondary menu, then “Aux Clip” button

(SHIFT+B): the ID of the Aux Clip appears in the title bar of the
Playlist screen (F10)

3. To remove the current Aux clip, load the Aux Clip, call the secondary

menu by pressing MENU, then press CLEAR + SHIFT + (B) (“Aux
Clip”) on the remote.

HOW EXIT THE PLAYLIST MODE?


Press the RECORD key to exit the playlist mode and return to E2E mode.