EVS MulticamLSM Version 8.03 - Dec 2006 User's Manual - Manual (Page 121)

EVS MULTICAM - User’s Manual
EVS Broadcast Equipment SA – Dec 2006
Version 8.03
119
In dual stereo mode
*PL11/03* LEFT 06:42:22
V Mix 02:25 Spd.Unk
A Mix 02:25 A.Del. 00:00
IN-00:00:00 OUT+00:00:27
00:10
■■■ ■■ 3→1 3→3
■■ ■ 4→2 4→4
12:23:45:13 00:07:13 100
112B/04 ClipName 999/999
In stereo mode
*PL11/03* LEFT 06:42:22
V Mix 02:25 Spd.Unk
A Mix 02:25 A.Del. 00:00
IN-00:00:00 OUT+00:00:27
00:10
■■■ 2→1
■■ 2→2
12:23:45:13 00:07:13 100
112B/04 ClipName 999/999
One can set as many swap points as needed.
If only an ‘in’ swap point is set for one clip, the audio tracks will be reset
by default for the next clip in the playlist.
Please note that when a swap point is set, a cross-fade is played between
the original audio track and the new track. The duration of the cross-fade
is the default audio transition.
When a swap point is present in a playlist, the display on the VGA and on
the OSD changes : a “*” is added next to the audio Fx information.
Display on the VGA
CLIP:04 Name5678(Loc) PL:11 PlistName_12 999 CLIPS AUX:111A/01 AuxClip_Name
F1:NAME CLIP Sh+F1:NAME F2:CLIP/CAM PL F3:CALL F8:SRCH F9:CLIPS
# Clip Name T/C In Duration Spd VideoFx Split AudFx Cur.Dur.
001 111A/01 ClipName_12 hh:mm:ss:fr mm:ss:fr 100 M ss:fr ss:fr ss:fr hh:mm:ss:fr
002 111A/01 » ClipName_12 «hh:mm:ss:fr mm:ss:fr 100 M ss:fr ss:fr ss:fr*hh:mm:ss:fr <-
003 111A/01 ClipName_12 hh:mm:ss:fr mm:ss:fr 100 M ss:fr ss:fr ss:fr hh:mm:ss:fr