Avago Technologies LSI20160 - Manual (Page 91)

Using the NT Configuration Utility 4-23
Copyright © 1993–2001 by LSI Logic Corporation. All rights reserved.
Table 4.1 Main Menu Bar and Footer
Items Descriptions
File Displays the menu path for Save and Exit choices. To save NVRAM
data pertinent to the adapters using the NT Configuration Utility,
select Save. To exit from the NT Configuration Utility, select Exit.
Note: No automatic update to the adapter(s) is done. Select Save or
click on the Accept button to save all changes.
Options Displays utility or adapter configuration options to change. To change
the language used for the interface, select Language. This list is
dynamic and is based on the number/type of language DLLs found
in the directory with the executable.
To change settings for host adapter cards, select Adapter Settings.
To change settings for SCSI devices, select Device Selections.
To execute Domain Validation on an installed LSI53C1010 based
host adapter, select Domain Validation.
The selected option displays a corresponding menu with adapters
found. Click on the adapter whose related values are to be changed.
When the values of the adapters in the NVRAM Found column
indicate Yes, then changes are allowed. If the value is No, the adapter
can be selected to display default values, but no changes are
allowed.
Help To display information pertinent to a particular menu, click on the
Help menu selection.
Accept To save the configuration change(s) and exit from the Main menu,
click on the Accept button. If concluding Domain Validation testing
and new values were saved, it is not necessary to click on the Accept
button.
Cancel To exit from a particular menu level and discard any changes that
may have been made, click on the Cancel button. Changes are not
discarded once changes have been saved during Domain Validation
testing. Exiting from previous menu levels does not affect changes
made and saved at the Domain Validation Test level.