Avago Technologies LSI20160 User Manual
Page 216
10-10
Solaris Device Driver Installation
Copyright © 1993–2001 by LSI Logic Corporation. All rights reserved.
Do you want to overwrite this installed instance [y, n
,
?, q]
Type
y
for Yes to overwrite the old driver, and press Enter.
Solaris 8: This message appears and prompts:
Do you want to create a new instance of this package
[y, n, ?, q]
Type
y
for Yes and press Enter.
Insert the SYMHISL ITU diskette into the floppy drive.
Step 20. Remove the Driver ITU diskette from the diskette drive if drivers
on other Solaris Driver ITU diskettes are required. The system
will prompt you with this message:
If you have additional Update diskettes to install (such
as video
),
please insert diskette now
.
Additional Update diskettes to install? [y/n]
Step 21. Type
y
for Yes if applicable.
Step 22. Repeat this process until all drivers you need are installed.
When you type n for No and press Enter, this message
appears:
Solaris 7: Installation of
Solaris 7: The system continues with the installation process.
Go to step 23.
Solaris 8: Installation of
Solaris 8: The system automatically reboots at this point.
Step 23. When the Solaris 7 installation has completed, the message
Installation complete
appears.
Step 24. Remove the diskette from the floppy drive.
The system automatically reboots.
When the Solaris operating environment is finished booting and running,
the new devices whose drivers that you installed are available for use. To
verify the version number for the Solaris 7 or Solaris 8
symhisl
driver,
type at the prompt:
# modinfo | grep sym
After entering this command, the system will display the version number.