Avago Technologies LSI20160 - Manual (Page 125)

Using SCSI Tools for Windows 2000 5-21
Copyright © 1993–2001 by LSI Logic Corporation. All rights reserved.
5.7.2 Installing SCSI Tools for Windows 2000
If your system already has SDMS ASPI for Windows 2000, follow the
instructions for running the InstallShield setup program. Otherwise, the
SDMS ASPI utility must be installed first before installing this SCSI Tools
package. Refer to
Section 5.6, “Using SDMS ASPI for Windows 2000.”
To install the SCSI Tools for Windows 2000 software, you execute an
InstallShield setup program. If you obtained the software from the
LSI Logic web site, it is in the form of a self-extracting zip file. Expand
the zip file to install the software into a directory on your hard disk drive,
or to a diskette and then run
SETUP.EXE . Note that the installer must have
Windows NT 4.0 Administrator capabilities for running the SETUP
program.
If you obtained the software from the SDMS Software Device Drivers and
Utilities CD-ROM, run the
SETUP.EXE program directly from:
{CD-ROM Drive Letter}:\UTILITY\WINDOWS\SYMTOOLS\I386
The setup program installs the SCSI Tools files into the proper directories
as well as making the appropriate registry entries. After installing the
software, you must reboot the computer.