Avago Technologies LSI20160 - Manual (Page 133)

About the ASPI8XX.SYS Driver 6-7
Copyright © 1993–2001 by LSI Logic Corporation. All rights reserved.
In the following descriptions, path refers to the adapter number (boot
order designation), and id refers to the SCSI ID. The following
conventions are also used:
[ ] items in brackets are optional
* means repeat item 0 or more times
Table 6.1 ASPI8XX Command Line Options
Option Name Description
/NORST Prevents a SCSI bus reset during loading of ASPI8XX.SYS .
Activate this option by modifying the line in the CONFIG.SYS file that loads
ASPI8XX.SYS to look like this:
DEVICE=C:[PATH]ASP8XX.SYS /NORST
/ASK Prompts at system bootup about loading the ASPI8XX.SYS driver.
Activate this option by modifying the line in the CONFIG.SYS file that loads
ASPI8XX.SYS to look like this:
DEVICE=C:[PATH]ASPI8XX.SYS /ASK
/WIDTH Defines the maximum data width negotiated with a device. This option can be used
with host adapters capable of 16-bit data transfers. Valid settings are 8 or 16.
Syntax: /WIDTH=n[:id]>[,n]*
If the first host adapter (boot order designation = 0) is a 16-bit adapter, and you wish
to force 8-bit transfers to a device at SCSI ID 2, the line in the
CONFIG.SYS file that
loads ASPI8XX.SYS should look like this:
DEVICE=C:[PATH]ASPI8XX.SYS /WIDTH=8<0:2>