Avago Technologies LSI20160 - Manual (Page 266)

IX-4
Copyright © 1993–2001 by LSI Logic Corporation. All rights reserved.
menu
adapter properties 2-9
adapter settings 4-24
boot adapter list 2-18
device properties 2-13
device selections 4-26
exit 2-22
global properties 2-20
main fields and descriptions 2-8
Microsoft CD-ROM extension 2.21 6-18
miniport drivers 3-3 , 4-5
mirrored partition
disk mirroring 4-15 to 4-16 , 5-12 to 5-13
multiple LSI Logic host adapters
Windows 95/98/Me 3-19
multisession photo CD
supporting 6-18
multitasking 7-1
N
negotiate with devices
description 2-21
NetWare
4.xx new system installation 12-7 to 12-8
5.xx new system installation 12-6 to 12-7
ASPI support with NWASPI driver 12-4
command line options 12-9
customizable options 12-11 to 12-15
description 12-4
DOS drivers 12-17
features 12-2
NWPA driver customizable options 12-10 to 12-15
preparing the system for NWPA drivers 12-5
reconfiguring driver options 12-9
symmetric multiprocessing 12-2
using ASPI8XX.SYS 12-17
using SDMS 4.XX BIOS 12-17
new system installation instructions
NetWare 12-6 to 12-8
SCO OpenServer 8-7 to 8-8
Solaris 10-6 to 10-10
UnixWare 9-5 to 9-6
Windows 2000 5-6 to 5-7
Windows 95/98/Me 3-6 to 3-7
Windows NT 4.0 4-7 to 4-11
next boot
description 2-19
NT ASPI
Windows NT 4.x 4-33
NT configuration utility
adapter settings menu 4-24
device selections menu 4-26
exiting 4-31
initializing main menu 4-21 to 4-24
starting 4-21
warning 4-21
NT fault tolerant floppy 4-15 to 4-16
NTCONFIG utility
installing for x86 platforms 4-21
NVM
nonvolatile memory 2-8 , 4-24
NVRAM
required for use with NT configuration utility 4-21
required for use with SCSI BIOS configuration utility 2-5
supporting Windows drivers 3-2
supporting Windows NT drivers 4-4
O
operating system
DOS 6-1 to 6-22
Linux 11-1 to 11-10
NetWare 12-1 to 12-18
OS/2 7-1 to 7-20
SCO OpenServer 8-1 to 8-18
Solaris 10-1 to 10-18
UnixWare 9-1 to 9-8
Windows 2000 5-1 to 5-18
Windows 95/98/Me 3-1 to 3-20
Windows NT 4-1 to 4-19
options
description 4-23
OS/2
ADD,DDP, EXE files 7-5
assigning driver order 7-8
command line options 7-9 to 7-16
deleting OS2CAM.ADD driver 7-6
description 7-4
features 7-2
LSI Logic devices supported 7-3
multitasking 7-1
troubleshooting 7-17
OS/2 command line option
/!DM 7-11
/!SM 7-11
/DISCONNECT 7-15
/EXCLUDE 7-12
/PARITY 7-15
/QTAG 7-16
/SYNCH_OFFSET 7-14
/SYNCH_RATE 7-13
/TIMEOUT 7-14
/VERBOSE 7-11
/WIDTH 7-16
P
parity
description 4-25
parity checking
disabling 4-25 , 6-9 , 7-15
pause when boot alert displayed
description 2-21
PCI bus
description 2-8 , 2-19
PCI high performance drivers
SYM_HI.MPD for Windows 95/98/Me 3-3
SYM_HI.SYS for Windows NT 4-5
performance tuning
Windows NT 4.0 4-13
port number
description 2-8 , 4-24
power management feature
/spindown option 6-16
preparing a driver diskette
installing NT ASPI 4-34
installing SCSI tools for Windows 95/98 3-21
installing Windows 2000 ASPI 5-20
presentation manager GUI 7-1
primary partitions
drive letters 6-22