Avago Technologies LSI20160 - Manual (Page 55)

Installing Drivers for Windows 95/98/Me 3-9
Copyright © 1993–2001 by LSI Logic Corporation. All rights reserved.
Step 9. Click on the Next button after the Intro window appears.
The Wizard provides a choice between having this utility search
for a better driver than the one in use or displaying a list of
drivers from a specific location.
Step 10. Choose search... and click on the Next button.
The next window allows you to specify which device(s) are
searched, such as a floppy diskette, CD-ROM, or to specify a
precise path.
Step 11. Select Floppy disk drive only, then click on the Next button.
The next window queries you about utilizing the currently
installed driver.
Step 12. Mark Install one of the other drivers , then click on the
View List button.
Next, a list of drivers appears from the specified search devices
as well as the currently installed driver.
Step 13. Highlight the driver of choice, and click on the OK button.
The previous window (in Step 12 ) appears with the selected
driver displayed as the driver to be installed.
Step 14. Click on the Next button.
The next window displays the chosen driver along with
reference to the designated path to install it in.
Step 15. Click on the Next button.
The Wizard Summary window appears.
Step 16. Click on the Finish button.
When installation has completed, the System Settings Change
dialog box appears.
Step 17. Remove the diskette from the drive and click Yes to restart the
computer.
For Windows Me
Step 8. Select the radio button that specifies the location of the driver.
Step 9. Click on the Next button.
Another window appears.