Avago Technologies LSI20160 - Manual (Page 236)

12-2 NetWare Device Driver Installation
Copyright © 1993–2001 by LSI Logic Corporation. All rights reserved.
12.1.1 Features
The SDMS NWPA drivers for NetWare support these features:
•
Ultra160 data transfers (for LSI53C1000 and LSI53C1010)
•
Domain Validation (for LSI_U3NW.HAM driver only)
•
Synchronous negotiation (including Fast SCSI, Ultra SCSI,
Ultra2 SCSI)
•
Multiple host adapters
•
Multiple Logical Unit Numbers (LUNs)
•
Large LUNs (larger than 7.844 Gbytes)
•
Disconnect/Reconnect
•
Tagged command queuing
•
Simple and ordered queue tags
•
Scatter/Gather
•
Shared interrupts
•
Wide SCSI (SE and differential)
•
SDMS BIOS 4.XX or earlier (with ASPI8XX.SYS version 4.10 or
greater)
•
SDMS BIOS 4.18 (without ASPI8XX.SYS )
•
SDMS DOS 4.XX drivers
•
Target Initiated Negotiation (TIN) (wide and synchronous)
•
SCSI Magneto Optical (MO) devices by using NetWare’s
SCSIMO.CDM
In conjunction with NetWare:
•
ASPI interface using NetWare’s NWASPI.NLM
•
SCSI CD-ROM devices using NetWare’s SCSICD.CDM
•
SCSI-2 Tape devices using NWTAPE.CDM for versions 4.XX and 5.XX
•
Symmetric Multiprocessing (SMP) under NetWare 4.XX requires the
following files:
SCSIHD.DDI 1.34 , SCSIHD.COM 1.34 , and NWPA.NLM
2.32f . The newest versions of these files are available on the
NetWare Support Service Pack 6A for NetWare 4.XX (but not for
NetWare 4.2).