Avago Technologies LSI20160 - Manual (Page 211)

Building the SYMHISL Driver Update Diskette 10-5
Copyright © 1993–2001 by LSI Logic Corporation. All rights reserved.
10.2.2 For DOS System Users
Under this section, DOS system users may copy the symitu.dd image
file onto a formatted, blank diskette using the FDIMAGE.EXE utility.
Usage: fdimage [-dqsv] [-f size] [-r count] file drive
Table 10.1 describes the information selection options associated with
this executable program.
The FDIMAGE.EXE utility is available on the SDMS Software Device
Drivers and Utilities CD-ROM in each of these directories:
{DOS CD-ROM Letter}:\DRIVERS\UNIXES\SOLARIS\SOLARIS7
or
{DOS CD-ROM Letter}:\DRIVERS\UNIXES\SOLARIS\SOLARIS8
To create the SYMHISL Driver Update diskette, follow these steps:
Step 1. Copy the raw dd image onto a 1.44 Mbyte diskette. Locate the
symitu.dd image from the appropriate directory:
{DOS CD-ROM Letter}:\DRIVERS\UNIXES\SOLARIS\SOLARIS7
or
{DOS CD-ROM Letter}:\DRIVERS\UNIXES\SOLARIS\SOLARIS8
Table 10.1 FDIMAGE Information Selection Options
Options Description
-d Debug mode
-f size Specify the floppy diskette format by capacity; for
example, 160K, 180K, 320K, 360K, 720K, 1.2M,
1.44M, 2.88M
-q Quick mode: do not format the disk
-r count Retry count for format/write operations
-s Single-sector I/O
-v Verbose