Avago Technologies LSI20160 User Manual
Page 194
8-14
SCO OpenServer 5 Device Driver Installation
Copyright © 1993–2001 by LSI Logic Corporation. All rights reserved.
The CD-ROM Configuration Program menu appears.
Step 2.
Select option 1 to install a CD-ROM drive and press Enter.
The system prompts to configure the CD-ROM Drive.
Step 3.
Type
y
and press Enter.
The system prompts for the identifier of the host adapter that
supports this device.
Step 4.
If the default is correct, press Enter. If it is incorrect, type:
slha
Press Enter.
The system prompts for the host adapter that supports the
CD-ROM drive.
Step 5.
Type the correct host adapter number and press Enter.
If an additional host adapter is being added to the SCO
OpenServer kernel, the system may prompt if you want to
update the link-kit (add another host adapter).
Type
y
and press Enter if you entered the host adapter number
correctly;
or
Type
n
and press Enter, if you entered the host adapter
number incorrectly. The system then prompts for the host
adapter identifier of the preceding step.
The system prompts for the SCSI bus number of the CD-ROM.
LSI Logic host adapters support one bus per adapter.
Step 6.
Press Enter to get the default of zero (0) or type 0.
The system prompts for the SCSI ID of the CD-ROM drive.
Step 7.
Type the SCSI ID number, and press Enter.
The system prompts for the LUN of the CD-ROM drive.
Step 8.
Type the desired LUN and press Enter, or press Enter for the
default value of zero.
The system prompts to update the SCSI Configuration file.
Step 9.
Type
y
and press Enter.