Avago Technologies LSI20160 - Manual (Page 108)

5-4 Windows 2000 Device Driver Installation
Copyright © 1993–2001 by LSI Logic Corporation. All rights reserved.
The SYM_U3.SYS driver is named “Symbios Ultra3 PCI SCSI Driver” for
driver installation. It supports the following devices and their associated
LSI Logic host adapters:
•
LSI53C1000 (LSI20160, LSI20160L)
•
LSI53C1010 (LSI21040, LSI22915A, LSI22903, LSI21003,
ITI6200U3LP)
5.2 Using the SDMS Windows 2000 Drivers
The SDMS Software Device Drivers and Utilities CD-ROM contains the
SYMC8XX.SYS , SYM_HI.SYS , SYM_895A.SYS , and SYM_U3.SYS drivers at
this location:
{CD-ROM Drive Letter}:\DRIVERS\WIN2K
You must prepare an SDMS Driver Diskette before proceeding with the
installation instructions.
5.2.1 Preparing an SDMS Driver Diskette
Various subdirectories contain the miniport drivers and their associated
files. The subdirectory structure is:
{CD-ROM Drive Letter:}\DRIVERS\WIN2K\XXXXX\I386
where XXXXX represents the specific Windows 2000 subdirectory. For
example, the SYMC8XX.SYS driver is located in the 8XX2K subdirectory.
Copy all the files starting from the I386 subdirectory through the
MINIPORT subdirectory ( I386/WINNT/MINIPORT ) to the root directory of a
clean diskette. You will use this SDMS driver diskette during installation.
You may also download current Windows 2000 drivers from the LSI Logic
Web site at:
http://www.lsilogic.com. After you are connected
to this Web site, place your cursor on the Get Drivers option in the menu
bar. Click on the Drivers selection. Choose the Windows 2000 operating
system for SCSI from the list. Click on the Go button. Follow the
instructions on subsequent screens to download the drivers.