Avago Technologies LSI20160 - Manual (Page 51)

Installing Drivers for Windows 95/98/Me 3-5
Copyright © 1993–2001 by LSI Logic Corporation. All rights reserved.
•
SYMC8XX.MPD
•
SYMC8XX.INF
For the SYM_HI.MPD driver, locate the files at:
{CD-ROM Drive Letter}:\DRIVERS\WIN9X\WIN9XHI .
•
SYM_HI.MPD
•
SYM_HI.INF
For the SYM_U3.MPD driver, locate the files at:
{CD-ROM Drive Letter}:\DRIVERS\WIN9X\9XULTRA3
•
SYM_U3.MPD
•
SYM_U3.INF
You may also obtain the Windows 95/98/Me drivers from the LSI Logic
web site at:
http://www.lsilogic.com. After you are connected to this
web site, place your cursor on the Get Drivers option in the menu bar.
Click on the Drivers selection. Choose the Windows 95/98/Me operating
system for SCSI and click on the Go button. Follow the instructions on
subsequent screens to download the drivers.
3.3 Installing Drivers for Windows 95/98/Me
This section provides installation instructions for new and existing
Windows 95/98/Me systems.
3.3.1 New System Installation
Use this procedure to install the SYMC8XX.MPD , SYM_HI.MPD , or
SYM_U3.MPD drivers onto Windows 95/98/Me systems. Windows
95/98/Me automatically adds the driver to the registry and copies the
driver to the appropriate directories. You must install drivers for all host
adapters that are listed as “PCI SCSI Bus Controller.” Installing these
drivers can be done completely before rebooting your system.
Note: A driver bundled in Windows 95, Windows 98, or Windows
Me supports some LSI Logic PCI to SCSI host adapters.
For those adapters, the bundled driver is automatically