2 lsi logic devices supported, Lsi logic devices supported – Avago Technologies LSI20160 User Manual
Page 107

Introduction
5-3
Copyright © 1993–2001 by LSI Logic Corporation. All rights reserved.
•
SCSI pass-through functionality
•
Disk array configurations with no LUN 0
•
Disk array configurations with noncontiguous LUNs
•
Target Initiated Negotiation (TIN)
•
Auto Request Sense
•
Maximum block size of 1 Mbyte in WIN2000
•
NVRAM (wide/sync parameters, SCSI Host ID)
5.1.2 LSI Logic Devices Supported
All LSI Logic devices and host adapters have undergone a name change.
They have transitioned from a SYM prefix to an LSI prefix. No name
changes have occurred for the SDMS Windows 2000 drivers.
The
SYMC8XX.SYS
driver is named “Symbios 53C8XX PCI SCSI Driver”
for driver installation. It supports the following devices and their
associated LSI Logic host adapters:
•
LSI53C810, LSI53C810A, LSI53C810AE (LSI8100S, LSI8100ASP,
LSI20810)
•
LSI53C815 (LSI815XS, LSI8150SP)
•
LSI53C825, LSI53C825A (LSI8250S, LSI8251S, LSI8251D,
LSI8250ASP, LSI8251ASP, LSI8251AD)
•
LSI53C860, LSI53C860AE (LSI8600SP, LSI20860)
•
LSI53C875, LSI53C875E (LSI8750SP, LSI8751SP, LSI8751D)
•
LSI53C876 (LSI22801, LSI22802)
•
LSI53C885
•
LSI53C895, (LSI8951U, LSI8952U)
The
SYM_HI.SYS
driver is named “Symbios PCI High Performance Driver”
for driver installation. It supports the following device and its associated
LSI Logic host adapters: LSI53C896 (LSI22910, LSI21002, LSI22902).
The
SYM_895A
driver is named “Symbios 895A/8953U PCI SCSI Driver”
for driver installation. It supports the following device and its associated
LSI Logic host adapter: LSI53C895A (LSI8953U).