2 for dos and windows system users, Table9.1 fdimage information selection options, For dos and windows system users – Avago Technologies LSI20160 User Manual
Page 202: Fdimage information selection options

9-4
UnixWare 7 Device Driver Installation
Copyright © 1993–2001 by LSI Logic Corporation. All rights reserved.
Step 2.
Remove the C8XX driver diskette for UnixWare installations as
instructed later in this chapter.
Step 3.
Label this diskette PCI SCSI SCO UnixWare Driver Diskette for
use during the installation process.
9.2.2 For DOS and Windows System Users
Under this section, DOS system users may copy the
UNIXWARE.DD
image
file onto a formatted, blank diskette using the
FDIMAGE.EXE
utility.
Usage: fdimage [-dqsv] [-f size] [-r count] file drive
describes the information selection options associated with this
executable program.
The SDMS Software Device Drivers and Utilities CD-ROM provides the
FDIMAGE.EXE
utility in this directory:
{DOS CD-ROM LETTER}:\DRIVERS\UNIXES\FDIMAGE.EXE
To copy the raw
dd
image, follow these steps:
Step 1.
Locate the
UNIXWARE.DD
image on the SDMS CD-ROM at:
{DOS CD-ROM Letter}:\DRIVERS\UNIXES\UNIXWARE\UW7
Step 2.
Insert a formatted 3.5-inch (1.44 Mbyte) diskette into your A:
floppy drive.
Step 3.
At the command prompt, type:
Table 9.1
FDIMAGE Information Selection Options
Options Description
-d
Debug mode
-f size
Specify the floppy diskette format by capacity; for
example, 160K, 180K, 320K, 360K, 720K, 1.2M,
1.44M, 2.88M
-q
Quick mode: do not format the disk
-r count
Retry count for format/write operations
-s
Single-sector I/O
-v
Verbose