Avago Technologies LSI20160 - Manual (Page 196)

8-16 SCO OpenServer 5 Device Driver Installation
Copyright © 1993–2001 by LSI Logic Corporation. All rights reserved.
Step 3. Reboot the system to activate the new kernel by typing at the
command prompt:
reboot
Press Enter.
Step 4. After the system reboots and the prompt appears, press Enter
and the new kernel loads by default.
Step 5. Log in as usual.
These conditions should exist after a successful installation:
•
The directory etc/conf/sdevice.d should contain a file named
slha. This file contains the sdevice entries.
•
The directory etc/conf/cf.d contains the files sdevice , mdevice ,
and mscsi . Files sdev.hdr and mdev.hdr describe the values of the
possible field entries in the files sdevice and mdevice , respectively.
– The sdevice file should contain an slha entry for each LSI Logic
host adapter configured in the system.
– The second field in the sdevice file should read “Y.”
– A slha entry should appear in the mdevice file.
– A slha entry for each configured SCSI device should appear in
the mscsi file.
•
Directory /etc/conf/pack.d/slha should exist and contain the files
Driver.o and space.c .