3 installing the symdisk.sys driver, 4 using command line options, Installing the symdisk.sys driver – Avago Technologies LSI20160 User Manual
Page 139: Using command line options
About the SYMDISK.SYS Driver
6-13
Copyright © 1993–2001 by LSI Logic Corporation. All rights reserved.
6.4.3 Installing the SYMDISK.SYS Driver
To install the
SYMDISK.SYS
driver, follow these steps:
Step 1.
Copy the
SYMDISK.SYS
driver to the boot disk.
The SDMS Software Device Drivers and Utilities CD-ROM
contains the
SYMDISK.SYS
driver in this directory:
{CD-ROM Drive Letter}:\DRIVERS\DOS
The
ASPI8XX.SYS
driver is also required.
Step 2.
Add the lines shown below to the
CONFIG.SYS
file. List the
drivers in this sequence:
DEVICE=C:[PATH]ASPI8XX.SYS
DEVICE=C:[PATH]SYMDISK.SYS
6.4.4 Using Command Line Options
The
SYMDISK.SYS
device driver has several embedded functions that are
accessed by using switches on the command line.
lists the
command line options. No spaces are allowed in a single command line
option, but spaces are required between different command line options.
In the following descriptions,
path
refers to the adapter number (boot
order designation), and
id
refers to the SCSI ID. The following
conventions are also used:
[ ]
items in brackets are optional
*
items in brackets followed by an * means repeat 0 or more times
|
choose one of the given items