Avago Technologies LSI20160 - Manual (Page 72)

4-4 Windows NT 4.0 Device Driver Installation
Copyright © 1993–2001 by LSI Logic Corporation. All rights reserved.
4.1.1 Features
The SDMS device drivers for Windows NT 4.0 support these features:
•
Synchronous negotiation (including Fast SCSI, Ultra SCSI,
Ultra2 SCSI)
•
Ultra160 data transfers (for LSI53C1000 and LSI53C1010)
•
Domain Validation (for SYM_U3.SYS driver only)
•
Cyclic Redundancy Check (CRC) (for SYM_U3.SYS driver only)
•
Parallel Protocol Request (PPR) (for SYM_U3.SYS driver only)
•
Wide negotiation
•
Tagged command queuing
•
Multiple host adapters
•
Multiple Logical Unit Numbers (LUNs)
•
Disconnect/Reselect
•
Scatter/Gather
•
Differential support
•
SCSI pass-through functionality
•
Disk array configurations with no LUN 0
•
Disk array configurations with noncontiguous LUNs
•
Target Initiated Negotiation (TIN)
•
Auto Request Sense
•
Maximum block size of 1 Mbyte for NT 4.0
•
NVRAM (wide/sync parameters, SCSI Host ID)
4.1.2 LSI Logic Devices Supported
All LSI Logic devices and host adapters have undergone a name change.
They have transitioned from a SYM prefix to an LSI prefix. No name
changes have occurred for the SDMS Windows NT 4.0 miniport drivers.
The SYMC8XX.SYS driver is named “Symbios PCI (53C8XX)” for driver
installation. It supports the following devices and their associated
LSI Logic host adapters: