Avago Technologies LSI20160 - Manual (Page 103)

Using SCSI Tools for Windows NT 4-35
Copyright © 1993–2001 by LSI Logic Corporation. All rights reserved.
4.9.1 Features
The SCSI Tools for Windows NT support these features:
•
Examination of SCSI device parameters
•
Power management
•
Disk cache management
4.9.2 Installing SCSI Tools for Windows NT
If your system already has NT ASPI, follow the instructions for running
the InstallShield setup program. Otherwise, the NT ASPI utility must be
installed first before installing this SCSI Tools package. Refer to
Section 4.8, “Using SDMS ASPI for Windows NT 4.0.”
To install the SCSI Tools for Windows NT software, you execute an
InstallShield setup program. If you obtained the software from the
LSI Logic web site, it is in the form of a self-extracting zip file. Expand
the zip file to install the software into a directory on your hard disk drive,
or to a diskette and then run
SETUP.EXE . Note that the installer must have
Windows NT Administrator capabilities for running the SETUP program.
If you obtained the software from the SDMS Software Device Drivers and
Utilities CD-ROM, run the
SETUP.EXE program directly from:
{CD-ROM Drive Letter}:\UTILITY\WINDOWS\SYMTOOLS\I386
The setup program installs the SCSI Tools files into the proper directories
as well as making the appropriate registry entries. After installing the
software, you must reboot the computer.