Existing system using aspi8xx.sys dos aspi driver, Section 3.3.3, “existing – Avago Technologies LSI20160 User Manual

Page 56

3-10

Windows 95, Windows 98, Windows Me Device Driver Installation

Step 10. Choose search as well as specifying the media to search, such

as floppy diskette, CD-ROM, or specific path.

Step 11. Click on the Next button.

For example, if floppy diskette was chosen, the system would
search for the correct driver on this diskette and automatically
select it.

Step 12. Click on the Next button.

The system displays a window indicating the directory where
the file will reside.

Step 13. Click on the Next button.

Step 14. Click on the Finish button.

The system displays a window prompting you to reboot your
computer.

Step 15. Reboot your system at this point for the installation of the driver

to take effect.

At this point, the new driver is operational. To check this, see

3.3.3 Existing System Using ASPI8XX.SYS DOS ASPI Driver

This procedure installs the

SYMC8XX.MPD

SYM_HI.MPD

, or

SYM_U3.MPD

drivers onto an existing Windows 95/98/Me system that is using the

ASPI8XX.SYS

DOS ASPI driver. Follow these instructions to install the

miniport drivers:

Step 1.

Boot Windows 95 or Windows 98 or Windows Me.

Step 2.

Click on the Start button. Select Settings-->Control Panel.

Step 3.

Double click on the System icon.

Step 4.

Click on the Device Manager tab.

Step 5.

Either double click on the Other entry or click once on the plus
sign to the left of it.

Step 6.

Select the

PCI SCSI Bus Controller

entry and click the

Properties button.

Step 7.

Click on the Driver button.

This manual is related to the following products: