Avago Technologies LSI20160 - Manual (Page 244)

12-10 NetWare Device Driver Installation
Copyright © 1993–2001 by LSI Logic Corporation. All rights reserved.
load LSIHINW.HAM wide=off
or
load LSI_U3NW.HAM wide=off
Note: No spaces are allowed within a single command line
option, but spaces are required between different command
line options.
12.4.1 Information Option
Using the Help Mode Option
Option(s) ? or h
Function Display the options available in the driver.
Possible Impact The driver will not load with ? or h specified.
Specify this option on the command line for a brief description of each
of the options available in the driver, as well as valid values for each
option. If you specify the ? or h option along with other options, the
system invokes the Help screen and ignores the other options. In this
case, the system does not load the driver.
12.4.2 NetWare NWPA Driver Customizable Options
This section describes options that allow you to customize the driver for
circumstances that may be unique to any system environment.
Each command may be preceded by a "/" or "-" for backwards
compatibility at the discretion of the user. The line options with multiple
names are simply aliases for the same command. For example, to
specify a SCSI bus host identification value, you could use one of these
three aliases:
•
HostScsiId
•
HostId
•
Hid
In this case, "hostscsiid", "hostid", and "hid" all specify the same option
for the selection of the host adapter id.