4 using command line options, Using command line options – Avago Technologies LSI20160 User Manual
Page 146

6-20
DOS Device Driver Installation
Copyright © 1993–2001 by LSI Logic Corporation. All rights reserved.
is in the
CONFIG.SYS
file, then:
[PATH]MSCDEX /D:MY_CD
should exist in the
AUTOEXEC.BAT
file. The
/D:
switches must
match.
Step 5.
Check installation instructions for the CD-ROM drive itself for
other parameters necessary to include with
MSCDEX
.
When
MSCDEX
is loaded during the
AUTOEXEC.BAT
file execution,
a message appears and shows the drive letter assignment to
the CD-ROM drive. For example:
DRIVE E = DRIVER MY_CD UNIT 0
This informs you that the CD-ROM drive is recognized and
ready for use.
6.5.4 Using Command Line Options
The
SYMCD.SYS
device driver has several embedded functions available
that are accessed by using switches on the command line.
lists
the command line options. No spaces are allowed in a single command
line option, but spaces are required between different command line
options.
In the following descriptions,
path
refers to the adapter number (boot
order designation). The following convention is also used:
[ ]
items in brackets are optional