Avago Technologies LSI20160 - Manual (Page 46)

2-22 SCSI BIOS and Configuration Utility
Copyright © 1993–2001 by LSI Logic Corporation. All rights reserved.
2.5 Exiting the SCSI BIOS Configuration Utility
The Exit menu for the SCSI BIOS Configuration Utility is used for all five
of the menus listed above. However, the available functionality is different
for the Main menu and the four subordinate menus.
Figure 2.7 illustrates
the Exit menu.
To exit from the Adapter Properties, Device Properties, Boot Adapter List,
or Global Properties menus, use these exit options:
To exit from the Main menu, use these exit options:
Important: If you reboot the system without properly exiting from this
utility, some changes may not take effect.
Figure 2.7 Exit Menu
LSI Logic SDMS (TM) PCI SCSI Configuration Utility Version PCI-4.XX.00
Adapter and/or device property changes have been made
Exit the Configuration Utility
Cancel exit This option returns you to the previous menu.
Save changes then
exit this menu This option implements any changes you made on the
previous menu and returns you to the Main menu.
Discard changes then
exit this menu This option restores the default settings and returns you
to the Main menu.
Cancel exit This returns you to the Main menu.
Exit the Configuration
Utility This option exits the configuration and automatically
reboots your system.