Avago Technologies LSI20160 - Manual (Page 48)

3-2 Windows 95, Windows 98, Windows Me Device Driver Installation
Copyright © 1993–2001 by LSI Logic Corporation. All rights reserved.
These drivers complete the path to an LSI Logic controller or processor
with an optional SDMS SCSI BIOS.
LSI Logic uses the same filenames for their drivers for different Windows
operating systems. The driver files are packaged either in separate
subdirectories based on the Windows operating system or on different
flex disks. To determine the driver file for Windows 95/98/Me, note that
the filename ends with
.MPD . The following sections describe these
drivers and their installation.
3.1.1 Features
The SDMS device drivers for Windows 95/98/Me support these features:
•
Ultra160 data transfers (for LSI53C1000 and LSI53C1010)
•
Domain Validation (for the SYM_U3.MPD driver only)
•
Parallel Protocol Request (PPR) (for the SYM_U3.MPD driver only)
•
Cyclic Redundancy Check (CRC) (for the SYM_U3.MPD driver only)
•
Synchronous negotiation (including Fast SCSI, Ultra SCSI, Ultra2 SCSI)
•
Wide negotiation
•
Auto Request Sense
•
Multiple host adapters
•
Multiple LUNs
•
Disconnect/Reselect
•
Scatter/Gather
•
Differential support
•
SCSI pass-through functionality
•
SCSI Configured AutoMatically (SCAM)
•
Target Initiated Negotiation (TIN)
•
NVRAM (wide/sync parameters, SCSI Host ID, SCAM on/off)
3.1.2 LSI Logic Devices Supported
All LSI Logic devices and host adapters have undergone a name change.
They have transitioned from a SYM prefix to an LSI prefix. No name
changes have occurred for the SDMS Windows 95/98/Me drivers.