Avago Technologies LSI20160 - Manual (Page 224)

10-18 Solaris Device Driver Installation
Copyright © 1993–2001 by LSI Logic Corporation. All rights reserved.
The symhisl driver was unable to initialize a required data structure and
therefore did not load. Please call technical support.
SYMHISL: Failed to attach interrupt handler
The symhisl driver was unable to initialize the interrupt handler as
required. Please call technical support.
SYMHISL: The adapter is malfunctioning
SYMHISL: The adapter is malfunctioning, of an unknown
type, or a revision that is not supported.
The symhisl driver is not able to communicate with the hardware. You
may need to update your driver or your hardware.
SYMHISL: Failed to create DMI minor node
The symhisl driver was unable to create a device node for the driver’s
DMI interface. If you are not using the DMI, then you may safely ignore
this message.
SYMHISL: Could not attach to the SCSI subsystem
The driver was unable to communicate with the SCSI device driver that
is part of the operating system. You may need to update your driver.