2 new netware 4.xx installations, New netware 4.xx installations – Avago Technologies LSI20160 User Manual
Page 241
Installing Drivers for NetWare
12-7
Copyright © 1993–2001 by LSI Logic Corporation. All rights reserved.
Step 2.
Insert the SDMS NWPA drivers diskette into drive
A:
or
B:
.
Step 3.
Press the INS key twice to select an unlisted driver.
A dialog box appears. If the driver diskette is in the
A:
drive,
press Enter to continue. If the driver diskette is in the
B:
drive,
press F3 (to specify the path to search for the driver), enter the
drive letter:
B:
, and press Enter.
The
LSI8XXNW.HAM
,
LSIHINW.HAM
, or
LSI_U3NW.HAM
driver
appears as a selection.
The system prompts you with the limited available command
line options for loading the driver. A description of each option
appears in the box at the bottom of the installation screen.
Refer to
Section 12.4, “Using the Command Line Options,”
for more information.
Step 4.
Modify any option values as needed for this installation.
Step 5.
Follow the prompts to complete this installation.
The HAM driver(s) are loaded for each LSI Logic controller SCSI channel
automatically in NetWare 5.XX.
12.3.2 New NetWare 4.XX Installations
This section provides the instructions for new NetWare 4.XX installations.
Read the steps before beginning the installation to familiarize yourself
with this procedure.
Step 1.
Begin the file server installation according to the instructions in
the Novell NetWare Installation Manual.
The NetWare installation procedure prompts you for a Disk
Driver.
Step 2.
Insert the SDMS NWPA drivers diskette into drive
A:
or
B:
.
Step 3.
Press the INS key twice to select an unlisted driver.
A dialog box appears. If the driver diskette is in the
A:
drive,
press Enter to continue. If the driver diskette is in the
B:
drive,
press F3 (to specify the path to search for the driver), enter the
drive letter:
B:
, and press Enter.
The
LSI8XXNW.HAM
,
LSIHINW.HAM
, or
LSI_U3NW.HAM
driver
appears as a selection.