Avago Technologies LSI20160 - Manual (Page 75)

Using the SDMS Windows NT Drivers 4-7
Copyright © 1993–2001 by LSI Logic Corporation. All rights reserved.
4.2 Using the SDMS Windows NT Drivers
The SDMS Software Device Drivers and Utilities CD-ROM contains the
SYMC8XX.SYS , SYM_HI.SYS , and SYM_U3.SYS drivers at this location:
{CD-ROM Drive Letter}:\ DRIVERS\WINNT
You must prepare an SDMS Driver Diskette before proceeding with the
installation instructions.
4.2.1 Preparing an SDMS Driver Diskette
Various subdirectories contain the miniport drivers and their associated
files. The subdirectory structure is:
{CD-ROM Drive Letter:} \DRIVERS\WINNT\XXXXX\I386
where XXXXX represents the specific Windows NT subdirectory. For
example, the SYMC8XX.SYS driver is located in the 8XXNT subdirectory.
Copy all the files starting from the I386 subdirectory through the
MINIPORT subdirectory ( I386/WINNT/MINIPORT ) to the root directory of a
clean diskette. You will use this SDMS driver diskette during installation.
You may also obtain the Windows NT 4.0 drivers from the LSI Logic web
site at:
http://www.lsilogic.com. After you are connected to this web
site, place your cursor on the Get Drivers option in the menu bar. Click
on the Drivers selection. Choose the Windows NT operating system for
SCSI and click on the Go button. Follow the instructions on subsequent
screens to download the drivers.
4.3 Installing Drivers for Windows NT
This section provides installation instructions for new and existing
Windows NT 4.0 systems.
4.3.1 New System Installation
This procedure installs the SYMC8XX.SYS , SYM_HI.SYS , or SYM_U3.SYS
drivers onto a Windows NT 4.0 system. Use this procedure when
installing Windows NT 4.0 onto an unused SCSI drive. Windows NT 4.0