Avago Technologies LSI20160 - Manual (Page 267)

IX-5
Copyright © 1993–2001 by LSI Logic Corporation. All rights reserved.
Q
queue tags
description 2-16 , 4-27
R
read write I/O time-out 4-27
rebuilding the kernel
SCO UNIX 8-15
reconfiguring driver options
Netware drivers 12-9
registry
adding entries 4-13 to 4-15 , 4-18
adding Windows 95/98/Me drivers 3-5
removable media support
description 2-10
restore defaults
description 2-11 , 2-16 , 2-21
S
SCAM support
description 4-25
Windows 95/98/Me 3-16
Windows NT 4-25
scan for device at boot time
description 4-27
scan for SCSI logical units
description 4-27
scan ID
description 2-15
scan LUNs
description 2-15
scan order
description 4-25
SCO OpenServer 5.X
activating the UNIX kernel 8-16
adding a SCSI CD-ROM 8-13 to 8-15
adding a SCSI disk drive 8-10 to 8-11
adding a SCSI tape drive 8-11 to 8-13
boot disk 8-2
BTLD (boot time loadable driver) 8-1
creating the BTLD diskette 8-4 to 8-6
device driver
description 8-4
features 8-2
existing system installation 8-8 to 8-10
handbook
providing details on UNIX installation 8-7
kernel
adding host adapter 8-14
LSI Logic devices supported 8-3
new system installation 8-7 to 8-8
preinstallation information 8-4
rebuilding the kernel 8-15 to 8-16
SCSI bus number 8-12
troubleshooting 8-17
SCSI BIOS configuration utility
displaying main menu 2-6 to 2-8
overriding settings 6-6
starting 2-4
updating with flash utility 6-30
SCSI bus scan order
description 2-10
SCSI commands 3-4
SCSI ID
description 2-15
SCSI low-level format utility 6-23 to 6-26
SCSI parity
description 2-10
SCSI pass-through facility 3-4 , 4-6
SCSI timeout
description 2-16
SCSI tools
installing for Windows 95/98 3-21
SDMS 4.XX BIOS
using in NetWare 12-17
SDMS SCSI BIOS
LSI Logic devices supported 2-2
secondary cluster server
description 2-11
slha
SCO openserver package 8-1 to 8-9
SMP (symmetric multiprocessing)
under NetWare 4.11 12-2
SMP upgrade 12-8
software support package
NT ASPI 4-33
SCSI tools for Windows 2000 5-21
SCSI tools for Windows NT 4-35
Solaris
device driver
description 10-3
features 10-2
existing system installation 10-11 to 10-12
new system installation 10-6 to 10-10
troubleshooting 10-12
spindown examples 6-16
spinup delay
description 2-11
support interrupt
description 2-21
supporting LSI Logic devices
BTLD driver 8-3
C8XX driver 2-2 , 9-2
SYM_HI.MPD driver 3-3
SYM_HI.SYS driver 4-5
SYM_U3.MPD 3-3
SYM_U3.SYS 4-5
SYM_U3NW.HAM 12-4
SYM8XXNW.HAM driver 12-3
SYMC8XX.MPD driver 3-3
SYMC8XX.SYS driver 4-4
SYMHINW.HAM driver 12-3
sym_256K.reg
adding registry setting 4-13 to 4-14
sym100IO.reg
adding registry setting 4-14
SYMCD command line options
/ASK 6-21
/NOBCD 6-21
/UPTOLUN 6-21
SYMCD.SYS
communicating thru ASPI8XX 6-18
DOS device driver
description 6-18
features 6-18
installing 6-19
troubleshooting 6-21