Grass Valley K2 Summit Storage Area Network v.7.1 User Manual
Grass Valley Equipment
This manual is related to the following products:
Table of contents
Document Outline
- Safety Summaries
- Finding Information
- Product Description
- Preparing for installation
- Cabling K2 SAN devices
- Setting up K2 SAN infrastructure
- Planning and implementing a K2 SAN with SiteConfig
- About developing a system description
- Importing a system description
- About device and host names
- Modifying a device name
- Modifying the control network
- Modifying the FTP/streaming network
- Modifying a media (iSCSI) network
- About IP configuration of network interfaces on devices
- Modifying K2 client unassigned (unmanaged) interface
- Modifying K2 Media Server unassigned (unmanaged) interface
- About SiteConfig support on K2 devices
- Discovering devices with SiteConfig
- Assigning discovered devices
- Modifying K2 client managed network interfaces
- Modifying K2 Media Server managed network interfaces
- Making the host name the same as the device name
- Pinging devices from the control point PC
- About hosts files and SiteConfig
- Generating host tables for devices with SiteConfig
- Managing K2 software
- Configuring K2 software deployment
- Backup and recovery strategies
- About the recovery disk image process
- Creating a recovery disk image for storing on E:
- Creating a recovery disk image CD set
- Restoring from a system-specific recovery disk image on E:
- Restoring from the generic recovery disk image on E:
- Restoring from a recovery disk image CD set
- Activating the Windows operating system
- Configuring the K2 SAN
- Importing a SiteConfig system description
- Configuring the Level 10 K2 SAN
- Configuring the Level 10R K2 SAN
- Configuring the Level 20 K2 SAN
- Configuring the Level 20R K2 SAN
- Configuring the Level 30 K2 SAN
- Configuring the Level 30R K2 SAN
- Configuring the Level 35 K2 SAN
- Configuring the Level 35R K2 SAN
- Configuring the Nearline 10 K2 SAN
- Configuring K2 clients on the K2 SAN
- Operating the K2 SAN
- Description of K2 SAN Devices
- Overview of K2 Storage Tools
- Administering and maintaining the K2 SAN
- Setting up application security
- Modifying K2 SAN settings
- Managing redundancy on a K2 SAN
- Working with K2 Media Servers
- Accessing K2 Media Server features in K2Config
- Taking a K2 Media Server out of service
- Using the Stop button in Server Control Panel
- Placing a K2 Media Server in service
- Shutting down or restarting a K2 Media Server
- Identifying K2 Media Server software versions
- Modifying K2 Media Server network settings
- Removing a K2 Media Server
- Replacing a K2 Media Server
- Replacing an iSCSI interface adapter (TOE card)
- Installing the Fibre Channel card driver
- Recovering from a failed K2 Media Server system battery
- Checking K2 Media Server services
- Working with K2 clients
- Accessing K2 client features in K2Config
- Shutting down or restarting a K2 client
- Taking a K2 client offline
- Bringing a K2 client online
- Adding a K2 client
- Removing a K2 client
- Identifying K2 client software versions
- Modifying K2 client control network settings
- Modifying K2 client media (iSCSI) network settings
- Modifying load balancing
- Working with the K2 Coder
- Using Storage Utility
- Working on the media file system and database
- Working with RAID storage
- Checking RAID storage subsystem status
- Checking controller microcode
- Identifying disks
- Get controller logs
- Unbind RANK
- About full/background bind
- Bind RANK
- Binding Hot Spare drives
- Loading RAID controller and expansion chassis microcode
- Downloading disk drive firmware
- Replacing a disk module
- Replacing a controller
- Upgrading to L30 controllers
- Configuring Level 10/20/30/35 RAID chassis network and SNMP settings
- Working with Ethernet switches
- K2 FCP Connect access for Final Cut Pro systems
- About K2 FCP Connect
- Install and configure Macintosh Final Cut Pro systems on a K2 SAN
- Final Cut Pro on K2 SAN quick start installation checklist
- K2 SAN System Requirements
- Macintosh System Requirements
- Install Xsan software
- Install K2 FCP Connect software on Macintosh systems
- Cable Macintosh systems
- Configure Macintosh systems for control network
- Configure Macintosh hosts files
- Configure Macintosh systems for Active Directory Domain
- Licensing K2 FCP Connect on the K2 SAN
- Add Macintosh systems to SAN hosts file
- Enable Access Control Lists on the K2 Media Server (FSM)
- Add Mac Client to K2 SAN
- Configure Mac Client on K2 SAN
- Test K2 SAN file access
- Verify bandwidth of SAN connection
- Verify Access Control Lists
- Configure HotBin
- About QuickTime import delay
- Connecting via SAMBA/CIFS
- Using Final Cut Pro on a K2 SAN
- Maintaining K2 FCP Connect
- Workgroup storage system description
- Workgroup storage cabling
- Workgroup storage network configuration
- Workgroup storage configuration
- Index