Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 228)

26 October 2009 K2 Storage Area Network Installation and Service Manual 228
Configuring optional NH servers
3. If you got a “The V: will not be available until this device is rebooted…” message
on the File System Server Configuration page, after the K2 Media Server restarts,
do the following:
a. In the K2 System Configuration application tree view, under the K2 Media
Server select the File System Server node.
The File System Server Configuration page appears.
b. Click Check and verify that the V: drive is shared. This is required for NAS
server functionality.
Configuring optional NH servers
If you have one or more optional NH K2 Media Servers, you next configure those
servers. This section applies to both NH1 (1 Gig FTP) servers and NH1-10GE (10 Gig
FTP) servers.
NOTE: Multiple NH servers on a K2 SAN must be of the same type, either all NH1
or all NH1-10GE.
1. In the K2 System Configuration application tree view, select the K2 Media Server
FTP Server Configuration
This page appears only if the
server has the role of FTP
server.
Do not modify these settings. Leave at default values of Max FTP
streams = 4 and FTP Data Socket Timeout = 60. Only qualified Grass
Valley personnel should specify other values, as these settings are
intended for use only with custom systems designed by Grass Valley.
Click
Next
Completing the
Configuration Wizard Click Finish . The wizard closes. The K2 Media Server restarts. Do not
proceed until restart processes are finished.
On this page… Do this…