Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 188)

26 October 2009 K2 Storage Area Network Installation and Service Manual 188
Configuring the redundant server B
iSCSI Bridge Server
Configuration
This page manages the
components that bridge
between iSCSI (the GigE
media network) and the
Fibre Channel connection to
the RAID storage. You
configure network settings
on the iSCSI adapters and
the page validates that the
Fibre Channel adapter is in
place and that the media
RANKs are visible as iSCSI
targets.
NOTE: The iSCSI
adapters on this
server must be on a
different subnet
than those on its
redundant server
partner.
Select Backup .
Select an iSCSI adapter and click Modify . A network configuration
dialog box opens. Verify or enter the media network IP address and
subnet mask and click
Apply .
Do not configure the second iSCSI adapter. It is not used on a L10R
system.
To verify drives, click
Check then View Target Drives . You should see
all your media drives listed.
Click
Next .
Metadata Server
Configuration
You do not need to enter or configure anything on this page.
Click
Next .
On this page… Do this…