Modifying the ftp/streaming network – Grass Valley K2 Summit Storage Area Network v.7.1 User Manual
Page 107

26 October 2009
K2 Storage Area Network Installation and Service Manual
107
Modifying the FTP/streaming network
4. Click OK to save settings and close.
Modifying the FTP/streaming network
1. In the
Network Configuration | Networks
tree view, select the K2 SAN's Site node.
The networks under that node are displayed in the list view.
2. Proceed as follows:
• In the list view, right-click the Streaming network and select
Details
.
The Network Settings dialog box opens.
Setting...
For control network
Type
Ethernet is required
Usage
Control is required
Redundancy
None is required. This is true even on a redundant K2 SAN. (Only the iSCSI
network is redundant on a redundant K2 SAN.)
Name
Control is recommended
Exclude from Host
Files
Unselected is required
Managed
Selected is required
Base IP Address
The first (lowest) IP address in the range of IP addresses managed by
SiteConfig. Required.
Number of Addresses
The number of IP addresses in the range managed by SiteConfig. Required.
Subnet Mask
The network's subnet mask. Required.
Gateway IP Address
Additional network settings managed by SiteConfig. Allowed.
Unmanaged
Unselected is required. Related settings are disabled.
DNS Servers
Servers providing DNS for name resolution. Allowed.
Default Interface
Name Suffix
Not allowed