Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 125)

26 October 2009 K2 Storage Area Network Installation and Service Manual 125
Modifying K2 Media Server managed network interfaces
Use this task to modify managed network interfaces on a K2 SAN device as follows:
• GS K2 Media Server
• LS K2 Media Server
• NH K2 Media Server
1. In the Interfaces list view determine the interface to configure, as follows:
• Identify the interface with which SiteConfig is currently communicating,
indicated by the green star overlay icon. This should be the control network
interface.
• Verify that the interface over which SiteConfig is currently communicating is
in fact the interface defined for the control network in the system description. If
this is not the case, you might have the control network cable connected to the
wrong interface port.
• Configure the control network interface first before configuring any of the other
interfaces.
• After you have successfully configured the control network interface, return to
this step to configure each remaining interface.
• For the K2 Media Server, do not configure the Fibre Channel interface, which is
a non-IP interface. SiteConfig does not manage this interface. It is represented
in SiteConfig only to complete the description of the K2 Media Server.
2. In the Interfaces list view, check the icon for the interface you are configuring.
If the icon has a red stop sign overlay, it indicates that current settings and planned
settings do not match or that there is some other problem. Hover over the icon to
read a tooltip with information about the problem.
3. In the Interfaces list view, right-click the interface you are configuring and select
Edit.
The Managed Network Interface Details dialog box opens.