Configuring the nh server - part 1 – Grass Valley K2 Summit Storage Area Network v.7.1 User Manual
Page 327
327
K2 Storage Area Network Installation and Service Manual
26 October 2009
Your K2 SAN appears in the tree view of the K2 System Configuration application.
5. Continue with the next procedure.
Configuring the NH server - Part 1
1. In the K2 System Configuration application tree view, select [
K2Server1]
.
For a NL10 system, this is the one NH server. For a NL10R system, this is NH
server A
2. Click the
Configure
button.
The Configure K2 Server wizard opens.
Follow the on-screen text to configure the NH server for a Nearline 10 K2 SAN, as
Page 3
Review the information on this page and verify that you have correctly
defined your K2 SAN.
For a Nearline 10 K2 SAN you should have the following:
•
One K2 Media Server
•
One Ethernet switch
For a Nearline 10R K2 SAN you should have the following:
•
Two K2 Media Servers
•
Two Ethernet switches
Click
Finish
. The Define New K2 Storage System wizard closes.
On this page…
Do this…