Configuring server a - part 2 – Grass Valley K2 Summit Storage Area Network v.7.1 User Manual
Page 263
263
K2 Storage Area Network Installation and Service Manual
26 October 2009
The configuration file for the media file system is displayed. You can verify media
file system parameters by viewing this file. Do not edit this file. Click
Accept
.
A “…Please wait…” message box displays progress and a “…succeeded…”
message confirms the process is complete.
7. A message informs you that you must restart the K2 Media Server, however the
restart at the end of the Configure K2 Server wizard suffices, so you do not need to
restart now.
8. Close the Storage Utility.
NOTE: Do not attempt to start K2 clients or otherwise bring the K2 SAN online
until instructed to do so later in this chapter.
9. Continue with the next procedure.
Configuring server A - Part 2
1. Return to the Configure K2 Server page from which you launched Storage Utility
and proceed as described in the following table: