Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 312)

26 October 2009 K2 Storage Area Network Installation and Service Manual 312
Configuring the redundant server 1B
Software Configuration
This page checks for the
software required to support
the roles you selected on the
previous page.
If software with Yes in the Required column reports as Not Installed, you
must first install it on the K2 Media Server before continuing. After
installing the software, click
Check Software . When all required
software reports as Installed, click Next .
Network Configuration
This page displays the
control network Ethernet
port, and allows you to
configure the FTP/
Streaming network Ethernet
port.
NOTE: This page
does not configure
the iSCSI interface
(media network)
ports.
For Level 35R, this server
does not take the role of FTP
server, so configuring the
second port here for the FTP/
streaming network is not
required.
The top port is the port over which the K2 System Configuration
application is communicating with the K2 Media Server. If correctly
configured, it is already assigned the control network IP address, as
displayed on this page.
If the server has the role of FTP server, if the other port is not already
configured correctly, select the other port and click
Modify . A network
configuration dialog box opens. Enter the FTP/Streaming IP address and
the subnet mask and click
Apply .
Click Next .